吳友仁
長庚醫療財團法人林口長庚紀念醫院
國語,英語,閩南語 教授
ALL-on-4全口重建、人工植牙、牙科美學、快速植牙
吳友仁看診時間
| 星期一 | 24 小時營業 |
| 星期二 | 24 小時營業 |
| 星期三 | 24 小時營業 |
| 星期四 | 24 小時營業 |
| 星期五 | 24 小時營業 |
| 星期六 | 24 小時營業 |
| 星期日 | 24 小時營業 |
吳友仁醫師簡介
現職
- 長庚醫院北院區牙科部副部主任
- 學術組教授級主治醫師
- 教育部部定副教授
學歷
- 高雄醫學大學牙醫學士
- 美國南加州大學顱顏生物學碩士
經歷
- 高雄長庚牙科部部主任
- 高雄長庚國際醫療中心主任
- 高雄長庚牙周病科主任
- 高雄長庚牙周病專科訓練機機負責人
- 美國南加州大學牙醫學院膺復補綴專科醫師
- 美國南加州大學牙醫學院人工植牙專科訓練
- 美國華盛頓州牙醫師執照
學會與認證
- 醫院牙科協會副理事長
- 醫策會二年期牙醫師畢業後一般訓練計畫實地訪查委員
- 台灣牙周病醫學會常務理事暨專科醫師審查委員
- 台灣牙醫植體醫學會專科醫師
論文及期刊發表
- Comparative study of 3D contact area percentage between zygomatic implant and bone in different surgical approaches: clinical and biomechanical perspectives.
Journal of Stomatology, Oral and Maxillofacial Surgery. 2024 Nov, (SCI; IF=1.8; DENTISTRY, ORAL SURGERY & MEDICINE 61/92). https://doi.org/10.1016/j.jormas.2024.102148 ;
Ting Xin Hong*, Aaron Yu Jen Wu*, Yuan Chien Chen, Jui Ting Hsu, Lih Jyh Fuh, Heng Li Huang* - A Biomechanical Evaluation of Distal Tilting Implants in All-on-Four Rehabilitation with Mild Mandibular Resorption: A Finite Element Analysis Study
Materials. 2024 Nov, (SCI;IF=3.1; METALLURGY & METAL 17/79, https://doi.org/10.3390/ma17225435 ;
Ming-Hsu Tsai * , Chung-Han Lee *, Aaron Yu-Jen Wu , Yao-Ning Lei , Hung-Shyong Chen and Yu-Ling Wu*. - Additive Manufactured Thermoplastic Parts Strengthen by Remelting Assisted by Inert Powder Mold. ACS APPLIED POLYMER MATERIALS.
ACS Publications, 2024 Oct ; (SCI ; IF=4.4; POLYMER SCIENCE 18/85); doi.org/10.1021/acsapm.4c02083
Chin-Cheng Lee, Ting-Fu Chang, Po-Tang Chen, Aaron Yu-Jen Wu,* and Kevin Chiou*. - Biomechanical Analysis of Titanium Dental Implants in the All-on-4 Treatment with Different Implant–Abutment Connections: A Three-Dimensional Finite Element Study.
Journal of Functional Biomaterials.2023 Oct;14 (SCI ; IF=4.8; Engineering,Biomedical 32/97)
Wang PS, Tsai MH, Wu YL, Chen HS, Lei YN, Aaron Yu-Jen Wu*. - Reverse torque value of angulated screw channel abutment before and after cyclic loading: An in vitro study.
Journal of Functional Biomaterials.2023 Mar;14:124 (SCI ; IF=4.8; Engineering,Biomedical 32/97)
Chen YH , Wu YL, Chen HS, Lin CP, Aaron Yu-Jen Wu*. - Short-term results of all-on-4 concept with trans-sinus implants in Taiwanese: A retrospective study.
Taiwan J Oral Maxillofac Surg 2022 Sep; 33,172-182
Lung H, Huang CY, Wu YL, Chen YS, Chang CH, Aaron Yu-Jen Wu* - The effect of an Er,Cr: YSGG Laser combined with implantoplasty treatment on implant surface roughness and morphologic analysis:a pilot in vitro study.
Journal of Functional Biomaterials. 2022 August;13:133 (SCI ; IF=4.8; Engineering,Biomedical 32/97)
Lin CJ, Tsai MH,Wu YL, Huang HL, Chen HS, Aaron Yu-Jen Wu* - Effect of marginal bone integrity and aftermarket abutment screws on dental implant systems-a perliminary study with Finite Element Method.
Materials 2022 August;15:5952 (SCI ; IF=3.4; Metallurgy & Metallurgical Engineering 20/78)
Wu YL, Tsai MH, Chen HS, Lin CP, Aaron Yu-Jen Wu* - Effects of marginal bone loss progression on stress distribution in different implant–abutment connections and abutment materials: a 3d finite element analysis study.
Materials 2022 August;15:5866 (SCI ; IF=3.4; Metallurgy & Metallurgical Engineering 20/78)
Lin CP, Shyu YT, Wu YL, Tsai MH,Chen HS, Aaron Yu-Jen Wu* - Biomechanical effects of bone atrophy, implant design, and vertical or tilted of posterior implant on all-on-four concept implantation: finite element analysis.
Journal of Medical and Biological Engineering. 2022 July ;42:488-497(SCI ; IF=2; Engineering,Biomedical 76/97)
Huang HL, Lin TW, Tsai HL, Wu YL, Aaron Yu-Jen Wu* - A retrospective analysis of implants with low insertion torque in immediately loaded full-arch fixed prostheses with corresponding occlusal schemes.
The International Journal of Oral &Maxillofacial Implants.2022 Jun;37:485-493(SCI ; IF=2; Dentistry,Oral surgery& medicine 66/91)
Huang CY, Aaron Yu-Jen Wu*, Wu YL, Lin CP, Lung H, Auyeung L - Biomechanical evaluation of bone atrophy and implant length in four implants supporting mandibular full-arch-fixed dentures.
Materials 2022 May; 15: 3295(SCI ; IF=3.4; Metallurgy & Metallurgical Engineering 20/78)
Huang HL,Tsai HL,Wu YL, Hsu JT,Aaron Yu-Jen Wu* - Comparing the fracture resistance and modes of failure in different types of CAD/CAM zirconia abutments with internal hexagonal implants:An in vitro study.
Materials 2022 Apr; 15: 2656(SCI ; IF=3.4; Metallurgy & Metallurgical Engineering 20/78)
Chang YT, Wu YL, Chen HS, Tsai MH, Chang CC, Aaron Yu-Jen Wu*